|
|
New types of membranes for electrolyzer hydrogen - oxygen
Hýbl, Jiří ; Sedlaříková, Marie (referee) ; Kunovjánek, Miroslav (advisor)
This work deals with the production of hydrogen and oxygen by electrolysis. Aims of this thesis are to measure different types of membranes and choose the best for use in elektrolyzer for hydrogen and oxygen production. Properties of membranes were tested in the laboratory electrolyzer in the short and long operation. The emerging gases from elektrolyzer were also tested on a gas chromatograph to determine the purity of produced hydrogen. At the same time are also tested different concentrations of KOH elektrolyte and the effect of concentrations on efficiency of electrolyzer.
|
|
|
Aircraft air-conditioning systems
Lednický, Ondřej ; Horák, Marek (referee) ; Třetina, Karel (advisor)
The bachelor thesis is focused on the aircraft air-conditioning systems, their functions and basic tasks needed for a safe and comfortable flight. The thesis is divided into several chapters: the first one deals with the most important factors influencing human health. Next chapter is focused on a description of the assurance of main components which are composing the aircraft air-conditioning system. Final chapter of the thesis deals with oxygen systems, which are essential for the survivor of the passengers in the case of an accident.
|
|
|
Barrier properties of varnishes for protection of photographs
Lokotschová, Radka ; Čeppan, Michal (referee) ; Veselý, Michal (advisor)
In this diploma thesis the basic principles of inkjet print, ink composition, print media and degradation mechanisms of ink dyes are summarized. The thesis deals with study of varnish barrier properties in coloured inkjet prints. Permeability of water vapour and oxygen (parts of atmosphere) depending on different coatings are tested there. In addition the influence of ozone on degradation of dyes was studied, while ozone was permeating through barrier varnish layer of inkjet print. Ozone plays an important role in degradation processes of the inkjet prints and it also causes a gas-fading. Concentrations of acting ozone were established by iodometric titration. Simultaneously kinetics of degradation of Orange 7 was studied on indicator papers.
|
|
|
Study of plasma species by mass spectroscopy
Bureš, Michal ; Čáslavský, Josef (referee) ; Čech, Vladimír (advisor)
Plasma polymer films of tetravinylsilane and mixture of tetravinylsilane and oxygen gas were deposited on silicon wafers. Oxygen gas was mixed in tetravinylsilane to improve the compatibility of thin films on glass substrates. Mass spectroscopy was employed during the cleaning of the deposition chamber to check residual gases and process gases, during plasma deposition to monitor neutral plasma species and to follow plasma stability.
|
|
|
Green as a healing element of buildings and cities
Šmídová, Kristina ; Blasinski, Petr (referee) ; Rubinová, Olga (advisor)
Tato práce se zaměřuje na představení městské zeleně jako důležitý prvek udržitelné výstavby, a především jako prvek, který zbavuje okolní vzduch znečištění a přispívá k lepšímu prostředí ve městech. Dále se tato diplomová práce zabývá vztahem mezi městskou zelení a znečištěním ovzduší oxidem uhličitým v Brně. Ve městě byla prováděná měření koncentrací oxidu uhličitého, kyslíku a sekundárních veličin po dobu půl roku od června do listopadu roku 2019. Měření byla prováděna na čtyřech místech v Brně a dále tato data byla mezi sebou porovnána. Dále byla navrhnuta zelená opatření. Ve dvou vybraných lokalitách v Brně byly vybrány střechy, na které byla navrhnuta extenzivní zelená střecha.
|
|
|
Burners for high-temperature industrial applications
Naď, Martin ; Hájek, Zdeněk (referee) ; Bělohradský, Petr (advisor)
The main purpose of the bachelor thesis is the discussion of different types of burners and their components. Emphasis is placed mainly on the combustion process with oxygen content more than 21 % in the combustion air, the so called oxygen-enhanced combustion (OEC). The thesis describes characteristic features, possibilities and appropriateness of its use. Since in handling of oxygen there is a level of risk of injury, the thesis also assesses the safety and risks associated therewith. As the combustion process in terms of OEC is significantly different from the conditions of combustion with the atmospheric air, the thesis analyses the impact of the content of oxygen in atmospheric air on flue gas temperature and fuel consumption.
|
|
|
Air enrichment with highly pure oxygen in combustion processes
Polášek, Kryštof ; Hudák, Igor (referee) ; Bělohradský, Petr (advisor)
This bachelor thesis deals with the oxygen enhanced combustion (OEC). The thesis describes different methods of enriching the combustion process with oxygen, also the advantages and disadvantages of enhancing the combustion are evaluated. The next part contains an overview of the use of OEC in specific industries. Since certain safety precautions must be taken when handling of oxygen, a separate chapter deals with the safety of oxygen enhanced combustion. In the last part of the thesis a simulation of the OEC process in ChemCAD software was carried out. The influence of oxygen concentration in the oxidizing agent on the flue gas volume, temperature, density and viscosity and the concentration of CO2 and H2O in the flue gas was investigated.
|
|
|
Plasma surface modification of glass fibers and its optimization
Širjovová, Veronika ; Knob, Antonín (referee) ; Čech, Vladimír (advisor)
Diploma thesis deals with glass fiber surface modification using plasma-enhanced chemical vapor deposition in order to prepare functional interface that enhances the properties of polymer composites. The effect of deposition conditions on shear strength was observed with respect to the chemical composition of the deposited film. Thin films were deposited on planar substrates and fibers using monomer tetravinylsilane in a mixture with oxygen at selected power of plasma discharge. Chemical composition of prepared material was analyzed by infrared spectroscopy. Planar substrate film adhesion was measured using the scratch test. The composite sample was prepared by embedding the surface modified fibers in unsaturated polyester resin, followed by the curing process. The cured composite sample underwent the short beam shear test.
|
|
|
Possibility of using LabView for simulation and calculation of the energy balance of a hydrogen-oxygen fuel cell
Fryda, Daniel ; Macháček, Jan (referee) ; Šlezingr, Jan (advisor)
This bachelor thesis deals with the calculation of the characteristics of hydrogen-oxygen fuel cell and their simulation in LabVIEW. It is divided into several parts. At the beginning thesis clarifies the issues of fuel cell and contributes to a better understanding of its activities. It explains what a fuel cell actually is, what is the principle of its work, describes its components, access to its history and its development to the present. Further on the thesis divides fuel cells into the different types and deals with deeper hydrogen-oxygen fuel cell. The fourth chapter is devoted to its use in practice and in laboratory education . Another part is focused on the LabVIEW program where is described the principle, use and basic parts of the program. In the practical part is implemented the model of the laboratory task in LabVIEW program. In chapter no. 6 are developed the operating instructions of the program and described in detail the creation of the model. The aim of this bachelor thesis is creation of an overview of fuel cells, their properties and possibilities of using for practice and laboratory education and then simulation of the laboratory task in LabVIEW program which is based on measured data and the characteristics of the hydrogen-oxygen fuel cell. This laboratory task can be used as teaching material for students in the Department of Electrical Power Engineering.
|
|
|
Fire Combustion Control System Based on Lambda Probe
Bartoš, Lukáš ; Tříska, Vít (referee) ; Šimek, Václav (advisor)
The bachelors thesis deals with a design of automatic regulation of biomass combustion in fireplaces by lambda probe. The probe measures residual amount of oxygen during the combustion and the measured value influences the efficiency of combustion process and harmful emissions which are emitted into the air. The first part of the thesis is focused onto a theoretical analysis of the proces of combustion and the effects which influence efficiency and emissions. The second part concerns the description and the use of necessary components for automatical combustion regulation. The third part deals with a pratical test which confirms or declines the possibility of regulation by measurement of residual amount of oxygen. The fourth part follows up with a design of a regulation algorithm and its implementation. The fifth part evaluates past tests and suggests a procedure for production.
|
guest ::
